Home > Products > Battery desulfator > Battery desulfator 400AH

 

 

Download

 

CLEN Battery Desulfator User Manual

 

 

PRODUCT OVERVIEW

 

 

Suitable capacity: below and around 400AH

 

 

 

Batteries often fail because “sulfates” slowly develop and cover the battery plates. This sulfating process also weakens the electrolyte and this combined with the gradual coating of the plates slowly and almost imperceptibly reduces the battery’s ability to receive, store and then deliver power. This sulfating process gradually impairs battery function and causes a capacity loss until the battery can no longer perform the desired task and so the battery is deemed to have “failed”. However using an Auto Pulse Battery Desulfator can reverse the process by dissolving the sulfates, cleaning the plates and restoring the electrolyte strength so improving a battery’s life and capacity for an extended period.

 

FUNCTION

The High-frequency Peak Pulse delivers an electronically controlled pulse to the battery causing crystalline sulfates to dissolve back into the electrolyte and so restoring battery function and electrolyte strength regaining the batteries ability to receive charging current and deliver discharge current.
 

 

APPLICATIONS

 

• Automotive batteries • Motorbike batteries • Marine, jetski batteries • Truck, RV batteries • Electric golf carts • Electric cars and scooters • Electric bicycles • Electric wheelchairs • Earthship / off-grid battery banks • UPS battery banks • DC systems of electrical substations • Telecommunication hubs • Wind farm storage systems • Solar farm storage systems • Back-up system battery banks • DC starting systems of generators

 


ADVANCED TECHNOLOGY
Many desulfator products use an old technology inductor design to generate the pulse to desulfate a battery. This old technology creates a harsh inductor peak that can be damaging to the battery plates.

Utilising our new capacity pulsing method a “soft” peak is generated so dissolving sulfates without damaging the battery plates.
Old technology also requires a large inductor so necessitating a physically large desulfator device whereas using our advanced technology design the Auto Pulse Desulfator device is very compact yet provides BIG performance.


 

NEW CYCLIC PULSING FUNCTION
In a similar manner to a Pulse battery charger (charge – rest –charge – rest etc) a cyclic desulfating pulse function (pulse – rest – pulse – rest etc) optimizes a batteries recovery process. This method of desulfation has been implemented in the new Auto Pulse Desulfator

 

AUTO PULSE DESULFATOR BENEFITS
Increases Battery Power
Extends Battery Life
Battery Charge Faster
Longer Discharge
Prevents Sulfate Build-up
Reduces Evaporation


 

COMPETITIVE ADVANTAGES

Fully Automatic voltage selection. 12V 24V 36V and 48V
New Cyclic pulse generation method for improved capacity recovery
Soft” Peak Pulsing
Auto cutoff function to prevent over discharge of battery

User Configurable override for manual voltage selection


USAGE METHOD

Just Red terminal connect to battery positive and black terminal to battery negative. And Auto Pulse Battery Desulfator can cutoff when battery’s voltage is low.

 

MANUAL VOLTAGE SELECTION

 

If the battery voltage is very low the automatic voltage selection may fail to set the correct voltage. In this instance it is possible to manually set the desired operating voltage. By pressing the voltage select button. The LED screen will first display the working voltage and if you want to then alter the working voltage setting just presses the key again and the unit will change to next value. After setting the desired voltage the display will switch off to conserve battery power.


 

CUT OFF VOLTAGE

Display

Cutoff voltage

12V battery

C12

11.0V

24V battery

C24

22.0V

36V battery

C36

33.0V

48V battery

C48

44.0V

 


SPECIFICATION

Auto-setting for 12-48V battery
Working Amp: 20mA max
Peak Amp: 4A max
Peak Voltage: 60-100V
Pulse Frequency: 10,000HZ 
LED light indicates when pulse working
Cutoff amp: <5mA
Size: 88*56*23mm
Weight: 120g, including inner package

 

 

THREE TERMINAL CHOOSING
 
CLEN-A, B, C directly connect to the battery by the terminal.
CLEN-1-A, B, C connect between the charger and battery box plug. Input side is be plugged in by charger terminal, and the desulfator’s out side is same the charger terminal.

 

 

 

Download

 

CLEN Battery Desulfator User Manual

please leave us message here if you are interested in this product.

other products from our company

Contact Us

Tel:00-86-025-66020326
Mob: 00-86-18001581176

scan for contact information